Your position:Home > Products

6082 Alu Sheet/Coil

--Properties of 6082 Aluminum Sheet/Coil

Alloy 6082 is typically supplied as plate and sheet from Shijie Al. it is an aluminum primarily alloyed with silicon and manganese. The addition of manganese controls the grain structure which in turn results in a stronger alloy. The most common tempers for 6082 aluminum are O, T4, T6 and T651 and 6082 is slightly higher mechanical properties in the T6 condition when bending or forming. Shijie Aluminum alloy 6082 also corresponds to DIN 3.2315, EN AW-6082 and AA6082 standard designations and specifications but may not be a direct equivalent.
 

Alloy No.

Si

Fe

Cu

Mn

Mg

Cr

Zn

Ti

Others

Al

6082

0.7-1.3

0.5

0.10

0.40-1.0

1.6-1.2

0.25

0.20

0.10

0.20

REMAIN

6082 Aluminum Alloy Products

Products

Type

Temper

Thickness(mm)

Width(mm)

Length(mm)

6063 aluminum sheet

Bare, Mill Finish

O

T4

T6

T651

0.3-8

Up to 2600

Up to16000

6063 aluminum plate

8-600

Up to 3300

Up to 16000





 






--Performance and Application
 
Typical material properties for 6082 aluminum alloy include weldability, brazability, solderability se well as machinability. Besides, alloy 6082 is a medium strength alloy with excellent corrosion resistance. So various commercial joining methods (welding, brazing, etc.) can be easily applied to 6082 alloy. Since 6082 is a heat treatable alloy, strength will be reduced in the weld region. 6082 aluminum sheet and plate are typically formed by rolling. Shijie offers alloy 6082 plate and sheet for highly stressed applications includes trusses, bridges, cranes, transport applications as well as mould. 


CONTACT
gsadan@outlook.com
anywnwszxh
Mr. Adan +86 185 0232 3052
No. 5-163, LvCheng North Road, XiPeng Town, JiuLongPo, Chongqing 401326, China
Copyright © 2015, Chongqing NSW Aluminum Co., Ltd. all technical support: Ming Wan Zhida legal declaration of privacy clause