Your position:Home > Products

5005 Alu Sheet/Coil

--Properties of 5005 Aluminum Sheet/Coil

5005 aluminum sheet/coil of Shijie Al. is certificated to ASTM, EN as well as JIS, etc. and it can be cut to size at customers’ need. Mg is the principal element in the 5005 aluminum sheet/coil and when it used as main alloying element or combined with Mn, high strength and no-heat treatable properties can be realized. 5005 aluminum sheet/coil of Shijie Al. has many tempers available, such as 5005-H12, 5005-H14, 5005-H16, 5005-H18,5005-H22, 5005-H24, 5005-H32, 5005-H34, 5005-H36, 5005-H38, etc.
 

Elements

Si

Fe

Cu

Mn

Mg

Cr

Zn

Ti

Others

Al

Content

0.3

0.7

0.2

0.2

0.5-1.1

0.1

0.25

-

0.15

Remain

Alloy
 Temper

Specified

thickness

Tensile
strength  

 Yield
strength

Elongation

(MPa)

(MPa)

(%)

5005-H34

or

5005-H24

0.2~0.63mm

138.179

Min104

min 3

0.63~1.2mm

min 4

1.2~6.3mm

min 5

6.3~50mm

min 8

5005-H32 or       5005-H22

0.2~600mm

118-158

Min83

min 3

5005-H14

145-186

min118

min1



--Performance and Application

The main content of 5005 aluminum sheet/coil is Fe, Mg and Si, thus, it has good weld-ability and resistance to correction (especially when anodized), which resulting in suitable for marine applications. 5005 aluminum sheet/coil is also a non-heat treatable alloy and it can be strengthened (hardened) by cold working. However, hot working should not normally be necessary. Besides, it scores well in formability, especially in softer tempers. The machinability of 5005 aluminum sheet/coil is generally fairly poor. 5005-H34 and 5003-H38 can be machined, but with much more difficult than many other aluminum alloys. 





CONTACT
gsadan@outlook.com
anywnwszxh
Mr. Adan +86 185 0232 3052
No. 5-163, LvCheng North Road, XiPeng Town, JiuLongPo, Chongqing 401326, China
Copyright © 2015, Chongqing NSW Aluminum Co., Ltd. all technical support: Ming Wan Zhida legal declaration of privacy clause