Your position:Home > Products

1050 Alu Sheet/Coil

--Properties of 1050 Aluminum Sheet/Coil

1050 aluminum sheet/coil belongs to commercially pure wrought family with a purity of 99.5% Aluminum. Except Al, 0.4% of Fe is added to 1050 aluminum sheet/coil, thus, it has high electrical conductivity. 1000 series aluminum group offers the best correction resistance compared to any alloy group, so does the 1050 aluminum sheet/coil. Shijie Al. can manufacture and supply high quality 1050 aluminum sheet/coil with 18 years experience. Besides, different tempers are available, such as O (annealed), H12, H14, H18, etc.
 

Elements

Si

Fe

Cu

Mn

Mg

Cr

Zn

Ti

Others

Al

Content

0.25

0.40

0.05

0.05

0.05

-

0.07

0.05

0.15

Remain

Alloy
 Temper

Specified

Tensile
strength  

Yield
strength

Elongation

Thickness(mm)

(MPa)

(MPa)

(%)

1050-O/

1050-H111

0.2-0.5

65-95

Min20

Min20

0.5-1.5

Min22

1.5-3.0

Min26

3.0-6.0

Min29

6.0-12.5

Min35

12.5-80.0

     

1050-H112

6.0-12.5

Min75

Min30

 Min20

12.5-80.0

Min70

Min25

 

1050-H12

0.2-0.5

85-125

Min65

Min2

0.5-1.5

Min4

1.5-3.0

Min5

3.0-6.0

Min7

6.0-12.5

Min9

12.5-40.0

 

1050-H14

0.2-1.5

105-145

Min85

Min2

1.5-3.0

Min4

3.0-6.0

Min5

6.0-12.5

Min6

12.5-25

 

1050-H16

0.2-0.5

120-160

Min100

Min1

0.5-1.5

Min2

1.5-4.0

Min3

1050-H18

0.2-0.5

Min135

Min120

Min1

0.5-1.5

Min140

Min2

1.5-3.0

Min2

1050-H19

0.2-0.5

Min155

Min140

Min1

0.5-1.5

Min150

Min130

1.5-3.0

1050-H22

0.2-0.5

85-125

Min55

Min4

0.5-1.5

Min5

1.5-3.0

Min6

3.0-6.0

 Min11

6.0-12.5

 Min12

1050-H24

0.2-0.5

105-145

Min75

Min3

0.5-1.5

Min4

1.5-3.0

Min5

3.0-6.0

Min8

6.0-12.5

1050-H26

0.2-0.5

120-160

Min90

Min2

0.5-1.5

Min3

1.5-4.0

Min4

1050-H28

0.2-0.5

Min140

 Min110

Min2

0.5-1.5

1.5-3.0

Min3


--Performance and Application

For its content above in the chart, 1050 aluminum sheet/coil has high ductility and high reflective finish. Besides, 1050 aluminum sheet/coil is non-heat treatment series is produced in extruded sections. It has excellent cold workability, braze-ability and solder-ability, and it is strengthened by cold working. However, 1050 aluminum sheet/coil has low mechanical strength compared to more significantly alloyed metals. All of these characteristics make 1050 aluminum sheet/coil well suited to chemical and electrolytic brightening but not in casting. Last but not least, moderate strength and good anodizing quality enables our products has a vast application.


CONTACT
gsadan@outlook.com
anywnwszxh
Mr. Adan +86 185 0232 3052
No. 5-163, LvCheng North Road, XiPeng Town, JiuLongPo, Chongqing 401326, China
Copyright © 2015, Chongqing NSW Aluminum Co., Ltd. all technical support: Ming Wan Zhida legal declaration of privacy clause